The Scale of VGI in Map Production: A Perspective on European National Mapping Agencies          下载免费PDF全文

Ana‐Maria Olteanu‐Raimond  Glen Hart  Giles M. Foody  Guillaume Touya  Tobias Kellenberger  Demetris Demetriou 《Transactions in GIS》2017,21(1):74-90

The perspective of European National Mapping Agencies (NMA) on the role of citizen sensing in map production was explored. The NMAs varied greatly in their engagement with the community generating volunteered geographic information (VGI) and in their future plans. From an assessment of NMA standard practices, it was evident that much VGI was acquired with a positional accuracy that, while less than that typically acquired by NMAs, actually exceeded the requirements of the nominal data capture scale used by most NMAs. Opportunities for VGI use in map revision and updating were evident, especially for agencies that use a continuous rather than cyclical updating policy. Some NMAs had also developed systems to engage with citizen sensors and examples are discussed. Only rarely was VGI used to collect data on features beyond the standard set used by the NMAs. The potential role of citizen sensing and so its current scale of use by NMAs is limited by a series of concerns, notably relating to issues of data quality, the nature and motivation of the contributors, legal issues, the sustainability of data source, and employment fears of NMA staff. Possible priorities for future research and development are identified to help ensure that the potential of VGI in mapping is realized.  相似文献   

Deep massive sulphide exploration using 2D and 3D geoelectrical and induced polarization data in Skellefte mining district,northern Sweden          下载免费PDF全文

Saman Tavakoli  Tobias E. Bauer  Thorkild M. Rasmussen  Pär Weihed  Sten‐Åke Elming 《Geophysical Prospecting》2016,64(6):1602-1619

Geoelectrical and induced polarization data from measurements along three profiles and from one 3D survey are acquired and processed in the central Skellefte District, northern Sweden. The data were collected during two field campaigns in 2009 and 2010 in order to delineate the structures related to volcanogenic massive sulphide deposits and to model lithological contacts down to a maximum depth of 1.5 km. The 2009 data were inverted previously, and their joint interpretation with potential field data indicated several anomalous zones. The 2010 data not only provide additional information from greater depths compared with the 2009 data but also cover a larger surface area. Several high‐chargeability low‐resistivity zones, interpreted as possible massive sulphide mineralization and associated hydrothermal alteration, are revealed. The 3D survey data provide a detailed high‐resolution image of the top ～450 m of the upper crust around the Maurliden East, North, and Central deposits. Several anomalies are interpreted as new potential prospects in the Maurliden area, which are mainly concentrated in the central conductive zone. In addition, the contact relationship between the major geological units, e.g., the contact between the Skellefte Group and the Jörn Intrusive Complex, is better understood with the help of 2010 deep‐resistivity/chargeability data. The bottommost part of the Vargfors basin is imaged using the 2010 geoelectrical and induced polarization data down to ～1‐km depth.  相似文献   

Comparison of P‐wave attenuation models of wave‐induced flow          下载免费PDF全文

Weitao Sun  Tobias M. Müller  José M. Carcione  Hong Cao 《Geophysical Prospecting》2015,63(2):378-390

Wave‐induced oscillatory fluid flow in the vicinity of inclusions embedded in porous rocks is one of the main causes for P‐wave dispersion and attenuation at seismic frequencies. Hence, the P‐wave velocity depends on wave frequency, porosity, saturation, and other rock parameters. Several analytical models quantify this wave‐induced flow attenuation and result in characteristic velocity–saturation relations. Here, we compare some of these models by analyzing their low‐ and high‐frequency asymptotic behaviours and by applying them to measured velocity–saturation relations. Specifically, the Biot–Rayleigh model considering spherical inclusions embedded in an isotropic rock matrix is compared with White's and Johnson's models of patchy saturation. The modeling of laboratory data for tight sandstone and limestone indicates that, by selecting appropriate inclusion size, the Biot‐Rayleigh predictions are close to the measured values, particularly for intermediate and high water saturations.  相似文献   

High‐temporal resolution fluvial sediment source fingerprinting with uncertainty: a Bayesian approach          下载免费PDF全文

Richard J. Cooper  Tobias Krueger  Kevin M. Hiscock  Barry G. Rawlins 《地球表面变化过程与地形》2015,40(1):78-92

This contribution addresses two developing areas of sediment fingerprinting research. Specifically, how to improve the temporal resolution of source apportionment estimates whilst minimizing analytical costs and, secondly, how to consistently quantify all perceived uncertainties associated with the sediment mixing model procedure. This first matter is tackled by using direct X‐ray fluorescence spectroscopy (XRFS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analyses of suspended particulate matter (SPM) covered filter papers in conjunction with automatic water samplers. This method enables SPM geochemistry to be quickly, accurately, inexpensively and non‐destructively monitored at high‐temporal resolution throughout the progression of numerous precipitation events. We then employed a Bayesian mixing model procedure to provide full characterization of spatial geochemical variability, instrument precision and residual error to yield a realistic and coherent assessment of the uncertainties associated with source apportionment estimates. Applying these methods to SPM data from the River Wensum catchment, UK, we have been able to apportion, with uncertainty, sediment contributions from eroding arable topsoils, damaged road verges and combined subsurface channel bank and agricultural field drain sources at 60‐ and 120‐minute resolution for the duration of five precipitation events. The results presented here demonstrate how combining Bayesian mixing models with the direct spectroscopic analysis of SPM‐covered filter papers can produce high‐temporal resolution source apportionment estimates that can assist with the appropriate targeting of sediment pollution mitigation measures at a catchment level. © 2015 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.  相似文献   

Polar organic micropollutants in the coastal environment of different marine systems     

Karsten Nödler  Dimitra Voutsa  Tobias Licha 《Marine pollution bulletin》2014

Polar anthropogenic organic micropollutants are frequently detected in freshwater and discharged on large scale into marine systems. In this work the results of 153 samples collected from the shorelines of the Baltic Sea (Germany), Northern Adriatic Sea (Italy), Aegean Sea and Dardanelles (Greece & Turkey), San Francisco Bay (USA), Pacific Ocean (USA), Mediterranean Sea (Israel), and Balearic Sea (Spain) are presented. The samples were analyzed for various classes of micropollutants such as pharmaceuticals, corrosion inhibitors, biocides, and stimulants. Caffeine, paraxanthine, theobromine, tolyltriazole, 1H-benzotriazole, and atrazine were detected in >50% of all samples. The detection frequencies of carbamazepine, iopamidol, diuron, sulfamethoxazole, paracetamol, theophylline, and atenolol were between 20% and 32%. As caffeine is linked to untreated wastewater, the widespread occurrence of raw sewage in marine environments and thus potentially elevated nutrient concentrations and risk for the presence of wastewater-related pathogens is remarkable.  相似文献   

On the breakdown of zircon upon “dry” thermal annealing     

Tamás Váczi  Lutz Nasdala  Richard Wirth  Mathias Mehofer  Eugen Libowitzky  Tobias Häger 《Mineralogy and Petrology》2009,97(1-2):129-138

Zircon samples without and with secondary chemical alteration from diverse sources were subjected to heat treatment at 1400 °C for 96 h. Resulting new phases and textures suggest that decomposition of zircon into component oxides occurred in all experiments to various degrees. The crucible material was found to have a strong influence on the extent of breakdown, especially in the case of altered starting materials. In this study the progressive stages of the breakdown of zircon grains are described. The factors that may govern the decomposition are discussed, including radiation damage, secondary alteration and external reaction conditions (sample container, atmosphere). Alumina crucibles should generally be avoided in dry annealing of zircon, to minimise uncontrolled breakdown into oxides.  相似文献   

Carry-over effects of the membrane interface probe     

Bumberger J  Radny D  Berndsen A  Goblirsch T  Flachowsky J  Dietrich P 《Ground water》2012,50(4):578-584

The membrane interface probe (MIP) is widely used to characterize the subsurface distribution of volatile organic compounds (VOCs). One problem that arises during MIP application is that disproportionately high MIP signals are obtained after passing source zones which contain mobile or residual phases. This serious problem occurs because of a carry-over effect, in particular caused by compound-specific retention times in the conventional unheated transfer line, commonly used during such an investigation. The objective of this study was to perform a qualitative methodical field evaluation of the carry-over effect of a conventional MIP system with a conventional unheated transfer line. This was achieved by coupling a mobile mass spectrometer to the MIP device. Results obtained were then further compared with those achieved using a laser induced fluorescence (LIF) system. Because of this coupling, time- and depth-dependent signals for different substances became known. Field evaluation data obtained showed complex superpositions of compounds with MIP system results. As a result of this superposition, MIP signals from the saturated zone beneath the source zone (zone with free and/or residual phase) are blurred and are therefore not representative of particular depths. However, utilizing multidirectional probing alongside conventional MIP probing (forwards and backwards), it was possible to detect the upper and lower phase boundary of the source zone. These MIP results correlated excellently with the LIF results. An important conclusion that can be drawn from the field investigation is that coupling a mobile mass spectrometer to the MIP system enables advanced MIP signal interpretation to be successfully achieved.  相似文献   

Runout analysis of a large rockfall in the Dolomites/Italian Alps using LIDAR derived particle sizes and shapes     

Florian Haas  Tobias Heckmann  Volker Wichmann  Michael Becht 《地球表面变化过程与地形》2012,37(13):1444-1455

LiDAR data were used to quantify and analyse a rockfall event which occurred in 2003 in the Western Dolomites (Italian Alps). In addition to previously existing airborne laserscanning (ALS) data, high resolution terrestrial laserscanning (TLS) data were collected. By using the original point clouds, the volume, axial ratio and runout length of single boulders as well as the surface roughness in the runout zone of the rockfall were derived. The total volume of the rockfall event of approximately 10 000 m³ was estimated by a reconstruction of the pre‐event surface at the detachment zone. The analysis of the laser scanning data of the accumulation zone revealed a power law scaling for boulder volumes larger than 8 m³. The dependence of runout length on boulder volume is complex; it is moderated by particle sphericity. In addition, we used ALS and TLS data to derive the spatial distribution of surface roughness on the talus cone. TLS allow for more accurate roughness mapping than ALS data, but for most applications the point density of ALS data seems to be sufficiently high to derive measures of roughness. Different sampling approaches for plane fitting on the scale of 5 m did not show significant effects besides the computational time. The results of our analyses provide important perspectives for rockfall modelling and process understanding with potential applications in both ‘applied’ (natural hazards) and ‘pure’ geomorphological research. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

A new method for the determination of the specific kinetic energy (SKE) released to pyroclastic particles at magmatic fragmentation: theory and first experimental results     

Tobias Dürig  Fabio Dioguardi  Ralf Büttner  Pierfrancesco Dellino  Daniela Mele  Bernd Zimanowski 《Bulletin of Volcanology》2012,74(4):895-902

Brittle magmatic fragmentation plays a crucial role in explosive eruptions. It represents the starting point of hazardous explosive events that can affect large areas surrounding erupting volcanoes. Knowing the initial energy released during this fragmentation process is fundamental for the understanding of the subsequent dynamics of the eruptive gas-particle mixture and consequently for the forecasting of the erupting column’s behavior. The specific kinetic energy (SKE) of the particles quantifies the initial velocity shortly after the fragmentation and is therefore a necessary variable to model the gas-particle conduit flow and eruptive column regime. In this paper, we present a new method for its determination based on fragmentation experiments and identification of the timings of energy release. The results obtained on compositions representative for basaltic and phonolitic melts show a direct dependence on magma material properties: poorly vesiculated basaltic melts from Stromboli show the highest SKE values ranging from 7.3 to 11.8 kJ/kg, while experiments with highly vesiculated samples from Stromboli and Vesuvius result in lower SKE values (3.1 to 3.8 kJ/kg). The described methodology presents a useful tool for quantitative estimation of the kinetic energy release of magmatic fragmentation processes, which can contribute to the improvement of hazard assessment.  相似文献   

Comparative analyses of glass fragments from brittle fracture experiments and volcanic ash particles     

Tobias Dürig  Daniela Mele  Pierfrancesco Dellino  Bernd Zimanowski 《Bulletin of Volcanology》2012,74(3):691-704

  相似文献